Ingersoll Rand UP5 SMALL UP TAS Series Screw Air CompressorTechnical Parameters Description:Integrated air tank type air compressor supply scope:-Air-cooled 40 degrees ambient temperature design to meet the requirements of all-weather operation-Integrated main engine, built-in double-layer tapered roller bearing design-380-415v/3ph/50hz, IEC standard design, IP55 TEFC three-phase induction motor-Automatic start/stop control & constant speed operation controller-Relay controller-Hot and cold room isolation design-Noise sound pressure: 65 - 69 dBA-Poly-V belt drive device for easy maintenance-High-efficiency "Energy Star" circulating refrigerated dryer-230v/1ph/ 50Hz single control voltage interface-Stainless steel finned heat exchanger-Dual high-efficiency filters: primary and fine filters-Built-in high-efficiency gas-water separator-Integrated integrated centrifugal cooling fan-Single drain port with electronic drain valve- Unit dimensions (mm): Base type: 1042 L x 734 W x 914 HWith 272L gas tank: 1311L×734W×1541H-Unit weight (kg): Base type: 330, With 272L gas tank: 455

Ingersoll Rand RM7-22KW Oil-Flooded Rotary Screw CompressorsTechnical Parameters Description:Description- Power frequency: 400V/3PH/50HZ TEFC/IP55/IE3 high-efficiency motorEasy-to-maintain XPZ belt drive- Frequency conversion: permanent magnet oil-cooled frequency conversion TEOC/IP66/IE5 high-efficiency motorFully direct connection, no gears required, higher transmission efficiency- Sturdy host with back-to-back cylindrical roller bearings- V-ShieldTM technology; active adaptive protection (PACTM)- Factory-filled Ultra SL Coolant (Super Source) advanced synthetic lubricant- Luminance controller, Chinese and English display, friendly operation interface- Online diagnosis and remote control based on modbus RTU communication protocol- Record more than 300 events that have occurred in the past- Modbus RTU communication protocol, serial communication port RS485- Standard IoT Internet of Things function- Unit size (mm) and weight (kg):RM7-11i: 716L x 677W x 1061H，222/225kg RM7-11n: 840L x 680 W x 810H, 169/182kg RM7-11i 272: 1380L x 790W x 1737H, 362/365kg RM7-11n 272: 1356L x 789W x 1520H, 309/322kg

Ingersoll Rand RS30 and RS37 Air CompressorsTechnical Parameters Description:Description- New generation screw rotor profile, using high-efficiency IE3 motor, leading energy efficiency in the industry (16% improvement over the past)- Integrated V-Shield, PAC, floating mounted cooling system, direct gear drive and other advanced technologies- Standard water separator- Highly intelligent Xe series controller- Xe-90 controller- Built-in self-linking function, can link up to 4 air compressors using Xe series controller- Modbus RTU communication protocol, serial communication port RS485- Model with built-in dryer configuration (suitable for environments up to 46 degrees Celsius, treated air quality reaches 1-4-1)- Long-life spare parts- Standard non-destructive electromagnetic drain valve ENL- IP65 controller panel protection level- IP55 electric control box protection level- Remote start/stop control (<50M)- Excellent high/low temperature environment performance- Unit size (mm): 1947 L x 1152 W x 1609 H

Ingersoll Rand RS45-RS75 Oil-Flooded screw air compressorTechnical Parameters Description:Description- Ultra-efficient IE5, imported HRM hybrid reluctance motor, TEFC/IP55 protection level 380-415V/3PH/50HZ- Newly designed rugged and reliable Ingersoll Rand main engine- Maintenance-free integrated gear direct drive system- Active adaptive control TM-PACTM protection system- V-ShieldTM technology- High-efficiency sequential cooling system- NEMA4/IP65 control panel protection level- IP55 sheet metal fully welded electric control box- Contains built-in dryer configuration TAS model (suitable for environments up to 46 degrees Celsius, and the treated air quality reaches 1-4-1)- Contains a built-in FAxxxIH grade BSPT threaded interface filter- Air-water separator and electronic drain valve- Factory-filled Ultra-Coolant super coolant, with a service life of up to 8,000 hours- Xe-Series Controller:- Built-in self-linking function, can link and control up to 4 air compressors using Xe series controllers (support 1 variable frequency, 3 industrial frequency)- Online diagnosis and remote control based on the network- Record 200 events that occurred in the past- Modbus RTU communication protocol, serial communication port RS485- Air cooling 69 / Water cooling 69 dB(A) low noise (sound pressure level)- Unit size (mm): 2433L x 1250W x 2032H- Unit weight (kg):RS45n air cooling 1304; water cooling 1209; TAS air cooling 1457; water cooling 1362RS55n air cooling 1700; water cooling 1631 TAS air cooling 1853; water cooling 1784RS75n air cooling 1726; water cooling 1631 TAS air cooling 1879; water cooling 1784

Ingersoll Rand RS45-RS75 Oil-Flooded screw air compressorTechnical Parameters Description:Description- 380-415V/3PH/50HZ TEFC/IP55 high-efficiency motor (IE3/GB3)- Newly designed rugged and reliable Ingersoll Rand main engine- Maintenance-free integrated gear direct drive system- Active adaptive control TM-PACTM protection system, V-ShieldTM technology- High-efficiency sequential cooling system, stainless steel air pipes and connectors- NEMA4/IP65 control panel protection level, IP55 sheet metal fully welded electric control box- Factory filled with Ultra-Coolant super coolant, service life up to 8,000 hours- Xe-series controller:- Built-in self-linking function, can link and control up to 4 air compressors using Xe series controllers- Network-based online diagnosis and remote control; record 200 events that have occurred in the past- Modbus RTU communication protocol, serial communication port RS485- Air cooling 69 / water cooling 69 dB(A) Low noise (sound pressure level)- Unit size (mm): 2433L x 1250W x 2032H- Unit weight (kg): RS45 air-cooled 1841; water-cooled 1746RS55 air-cooled 1936; water-cooled 1841; RS75 air-cooled 1962; water-cooled 1867

Ingersoll Rand RS90-160ie FS two-stage Oil-Flooded Rotary Screw CompressorsTechnical Parameters Description:- 380-415V/3PH/50HZ TEFC/IP55 IE3 high-efficiency motor- Newly designed rugged and reliable Ingersoll Rand airend- Maintenance-free integrated gear drive system- Active adaptive control TM-PACTM protection system- V-ShieldTM technology- High-efficiency sequential cooling system- NEMA4/IP65 control panel protection level- IP54 sheet metal fully welded electric control box- Air-water separator and electronic drain valve- Xe series intelligent controller:- Built-in self-linking function, can link and control up to 4 air compressors using Xe series controllers- Modbus RTU communication protocol, serial communication port RS485- Network-based online diagnosis and remote control- Record 200 events that have occurred in the past- Air-cooled 74 / water-cooled 74 dB(A) low noise enclosure- Unit size (mm): 2855 L x 1899 W x 2107 H- Unit weight (kg): RS90ie air-cooled 3270; water-cooled 3478;RS132ie air-cooled 3646; water-cooled 3854;RS110ie air-cooled 3364; water-cooled 3572; RS160ie air-cooled 4194; water-cooled 3986;

Ingersoll Rand R90-160NE two-stage compression variable frequency micro-oil screw air compressorTechnical Parameters Description:Description- Reliable HPM ODP motor for continuous and efficient operation- No motor bearings- Rugged and reliable Ingersoll Rand main engine with back-to-back tapered roller bearings- Maintenance-free integrated gear drive system- Air-cooled and water-cooled aftercoolers available- Luminance controller, controller panel protection level IP54:- Chinese and English display, user-friendly interface- Web-based online diagnosis and remote control- Record more than 300 events that occurred in the past- Modbus RTU communication protocol, serial communication port RS485- Standard IoT Internet of Things function- Air-cooled 75/ Water-cooled 72 dB(A) low noise housing- Unit size (mm): 2855 L x 1836 W x 2032 H- Unit weight (kg): Air-cooled 2495; Water-cooled 2472;

Ingersoll Rand R90-110i FS Single-stage compression micro-oil screw air compressorTechnical Parameters Description:Description- 380-415V/3PH/50HZ TEFC/IP55 IE3 high efficiency motor- Rugged and reliable Ingersoll Rand airend with back-to-back tapered roller bearings- Maintenance-free integrated gear drive system- Active adaptive control TM-PACTM protection system- V-ShieldTM technology- High efficiency cooling system- NEMA4/IP65 control panel protection level- Air-water separator and drain valve- Xe series intelligent controller:- Built-in self-linking function, can link up to 4 air compressors using Xe series controllers- Modbus RTU communication protocol, serial communication port RS485- Web-based online diagnosis and remote control- Record 200 events in the past- Air-cooled 75 / water-cooled 72 dB(A) low noise enclosure- Unit size (mm): R90/110: 2703 L x 1466 W x 2032 H- Unit weight (kg): R90: air cooling 2420; water cooling 2200;R110: air cooling 2550; water cooling 2330